This is a 100 micron sediment filter and I would like to know where to get it.
Thanks for your help.
Hello,
The W50PEHDA you mentioned is an American Plumber Sediment Filter, but it’s not 100 micron as you indicated. It’s a Fifty micron sediment removal filter. The equivalent would be the R50-BB which is 155053-51 R50 Big Blue / 4-1/2″ x 9-3/4″ approx. size.
i have an under the cabinet culligan aqua-clear three stage system.
the serial number on the back is ac 10057618 and it shows ac30 premium, ac30m, and ac30l.
i believe its two filters and a reverse osmosis cartridge.
What are the replacements needed for this one?
The Culligan Aqua Clear RO filters all use the same granular activated carbon pre-filter, the same activated carbon post filter, and the same particulate filter.
However the reverse osmosis module/membrane varies between the units.
Also, the size of the post filter is different.
I have a Ametek HD-10-R50 filter system. I need to know what are my choices in filters. Can you provide the item numbers and descriptions and the micron size for the ones available? Thanks.
You have a filter that’s approx. 10″ height, and 4 1/2″ width. Is this Correct?
If yes, you need a 10″ ‘BB’ Big Blue filter.
The one you currently use, or mentioned, is a sediment filter, 50 micron, to remove large particles from water.
I have an old counter top Ametek model CTR-00 water filter and I need to purchase cartridges (item 155403 CBR2-10R) and I have no way to find out if this cartridge will fit my old model.Do you have more information and tell me if this cartridge will fit my old model
We moved into a home that has a Ametek CSJ-C1 filter installed.
We would like to buy some replacement taste/odor filter cartridges. I
measured the old cartridge and it appears to be 9 3/4 by 2 1/2.What choices do we have?
If I buy the BBFS-222, an S1 20BB for the 1st stage, and a CP5 20 BB for the 2nd stage, what filter do you recommend for the 3rd stage to reduce iron content?
Thanks for contacting us.
First off, we don’t recommend. We only suggest.
Iron Water Filters Continued »
Looking for replacement cartridges for a water filtration system. The cartridgers are 4 inches in diameter and 20 inches long with a 1 inch diameter hole in each end. Need case prices of 1 and 5 micron filters
You need a “Big Blue” 20″ cartridge.
In order to provide a suggestion, we need to know for what the filter is used:
o To remove sediment and particles (general filtration)
o Or to remove taste and odor (provide drinking water)
We’ll await your reply… Remove Sediment and Bacteria from lake water Continued »
The following is an outline on how to change the Water Filters cartridges and your membrane for a standard RO water purification unit.
Changing Reverse Osmosis Filters and Membranes Continued »
can i get replacement cartridges for kinetico reverse osmosis systems?
Looking for the filters for Model #HF-360, for our RV
Re: Purtrex 5 micron 9 7/8″ repl filter
The filter is online at Sediment 5 Micron Filter.
Purtex 5 micron 10 inch filter Continued »
RO membrane and filters for a RO filtration system
Comments: Kleen-Plus by Ametek Reverse Osmosis Water Filtration System
Model RO-2127
I have found the following filters online CC-10 and P5
I could not find ROM-16C membrane.
I would like to get a few of all three.
The ROM-16C would be replaced by the CTA-15
All cartridges including the Membrane are online at: RO-2127 Kleen Plus
subject: Replacment Filters for my RainSoft Reverse Osmoses system
Reply: with ANY kind of helpful information about this
Which filter would I use in a “Ametek CT CC10″ countertop water filter
I have a well and need to get a replacement cartridge?
The identification number is GAC-BBS.
I there a place in Houston, TX i can get this and if not exactly which one is the correct one on your site. Thanks